(Supersedes LO 9-2805-203-12, 15 February 1990)
17 September 1991
ENGINE, GASOLINE 6 HP,
MILITARY STANDARD MODELS
(MODEL 4A032-1, NSN 2805-00-776-0483)
(MODEL 4A32-2, NSN 2805-00-068-7512)
(MODEL 4A032-3, NSN 2805-01-139-0596)
(MODEL 4A032-4, NSN 2805-01-276-5946)
References: TM 9-2805-262-14/andC9100-IL
REPORTING OF ERRORS
You can help improve this publication. If you find mistakes or if you
know of a way to improve the procedures, please let us know, Your letter
or DA Form 2028 (Recommended Changes to Publications and Blank
Forms) should be mailed directly to: Commander, U.S. Army Troop
Support Command, ATTN: AMSTR-MMTS, 4300 Goodfellow Blvd., St.
Louis, MO 63120-1798. A reply will be furnished to you.
This LO is for (C) crew/operator or organization (0) maintenance. Lube intervals
(on condition or hard time) and task-hour times are based on normal hours of
operation. Change the intervals if your lubricants are contaminated or if you are
operating the equipment under adverse conditions. Lube more during constant use
and less during inactive periods. Adequate preservation precautions must be taken
during inactive periods.
Drycleaning Solvent PD-680 used to clean parts is potentially dangerous to person-
nel and property. Avoid repeated and prolonged skin contact. Do not use near open
flame or excessive heat. Flash point of solvent is 1OOF-138F (38C-60C).
Clean parts with drycleaning solvent PD-680 and dry before lubricating.
Before you start your lube service.
a. Clean parts before lubricating.
a. Use wrong type/grade lubri-
b. Use the lubrication order as your guide
b. Use too much lubricant.
The 6 HP military standard engine, gasoline is not enrolled in the Army Oil Analy-
sis Program (AOAP). HARD TIME INTERVALS APPLY.
DISTRIBUTION STATEMENT A--Approved for public release; Distribution is
Card 1 of 4