Quantcast TURBOCHARGER IMPELLER INSTALLATION - TM-5-2815-232-140037

Custom Search
 
  
 
3500 ENGINE
SPECIFICATIONS
TURBOCHARGER IMPELLER INSTALLATION
INSTALLATION PROCEDURE CHART
TURBOCHARGER MODELS
T04, T04B,
TM51
T12, TV61,
T18, TV81,
TV91, TW91,
Step by Step Procedure
T04C,
TM54
TW61, TL61
TW81, TL81,
TL91, TV92,
TW4B, TW4C
TV72, TW72,
TW92, TL92
TL4B, TL4C
TL72, TV78,
TW78, TL78
A. Put impeller on the shaft.
B. Put a small amount of clean oil
on the threads and impeller face
area that contacts the nut.
C. Install and tighten the nut to:
2.25 Nm
5 Nm
17 Nm
17 Nm
31 Nm
(20 lb. in.)
(50 lb. in.)
(13 lb. ft.)
(13 lb. ft.)
(23 lb. ft.)
NOTICE
Do not bend or add stress to
the  shaft  when  the  nut
is
loosened or tightened.
D. Loosen the nut on the shaft.
E. Now tighten the nut to:
3.5 Nm
3.5 Nm
5 Nm
(30 lb. in.)
(30 lb. in.)
(50 lb. in.)
110
120
120
120
135
F. Tighten the nut more:
G. Remove the nut from the shaft.
H. Use 6V1541 Quick Cure Primer
on the threads of the shaft and
nut.
J.  Put 9S3265 Retaining
Compound on the threads of the
shaft and nut.
K. Install and tighten the nut to:
2.25 Nm
5 Nm
3.5 Nm
3.5 Nm
5 Nm
(20 lb. in.)
(50 lb. in.)
(30 lb. in.)
(30 lb. in.)
(50 lb. in.)
L. Tighten the nut more:
110
120
120
1200
135
Does not apply to these turbochargers.
NOTE: FOR TORQUE VALUES NOT GIVEN, SEE THE FIRST
PAGE OF SPECIFICATIONS FOR GENERAL TIGHTENING TORQUES
17


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.