DISASSEMBLY AND ASSEMBLY
AIR INTAKE SHUTOFF (3508)
Put the gasket and air intake cover (2) in position
on the air shutoff group. Install the bolts to hold
cover (2) in position.
Put clean engine oil on the O-ring seals on pipes
(4). Put pipes (4) and shield (3) in position on
the engine and install the bolts to hold these in
DISASSEMBLE AIR INTAKE SHUTOFF 1078-15
a) remove air intake shutoff
Remove the bolts from solenoid (1). Hold
handle (2) in the position as shown by hand or
with a wrench and remove solenoid (1) from the
air shutoff group. Slowly release handle (2) to
the shutoff position.
Bend the locks away from bolts (3) and loosen
all of bolts (3) that hold the plate assemblies to
the shaft assembly.