DISASSEMBLY AND ASSEMBLY
AIR INTAKE SHUTOFF (3508)
Move handle (2) back to the position as shown
by hand or with a wrench and put solenoid (1) in
position in the shutoff housing assembly. Install
the bolts and release the handle.
Remove the bolts, the locks, the plates and
bushings from plate assemblies (4). Remove
plate assemblies (4) from the shaft assembly.
Do Step I again to remove solenoid (1).
Remove the bolt and remove handle (2) from the
Remove the bolts and remove cover assembly
(5) from the housing assembly.
Remove seal (6) from cover assembly (5).
Remove pin (8) to remove spacer assembly (7)
from the housing assembly.