DISASSEMBLY AND ASSEMBLY
AIR INTAKE SHUTOFF (3508)
Use tool group (A) to install the seal until it is
even (flush) with the inside surface of cover
assembly (13). Make sure the lip of the seal is
toward the outside surface of the cover as
Install cover assembly (13) on the housing
assembly and the bolts to hold it.
Install handle (10) on the shaft assembly and the
bolts to hold it.
NOTE: To make the installation of the bolts in the air
shutoff group easier, the electric solenoid must be
installed before the air shutoff group is installed on the
Turn handle (10) to the open position as shown
and put the gasket and solenoid (14) in position on the
housing assembly. Release the handle and install the
bolts to hold the solenoid in position.
a) install air intake shutoff