Quantcast TACHOMETER DRIVE

Custom Search
 
  
 
3500 ENGINES
DISASSEMBLY AND ASSEMBLY
TACHOMETER DRIVE
REMOVE TACHOMETER DRIVE
7487-11
start by:
a)  remove service meter
1.
Disconnect the harness assemblies from the
adapter assembly.
2.
Remove bolts (1) and the clamps to remove
adapter assembly (2) from the shutoff drive
housing assembly.
3.
Remove shaft (3) from the gear assembly on the
end of the camshaft and the shutoff drive
housing assembly.
INSTALL TACHOMETER DRIVE
7487-12
1.
Install shaft ( 1 ) through the shutoff drive hous-
ing assembly and into the gear assembly on the
end of the camshaft.
2.
Put clean engine oil on O-ring seal (2) and install
adapter assembly (3) in the shutoff drive
assembly. Make sure the shaft of the adapter
assembly engages in the groove (slot) on the
end of shaft ( 1 ).  Install the bolts and the
clamps to hold the adapter assembly.
3.
Connect the harness assemblies to the adapter
assembly.
end by:
a)  install service meter
269


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.