DISASSEMBLY AND ASSEMBLY
INSTALL CRANKCASE BREATHER
Install the gasket and elbow (2) on the front drive
Install O-ring seals (1) on the elbow and put
clean oil on the seals.
Install element (4) in each breather assembly
Install cover assembly (5) on each breather
Put breather assemblies (3) in position on elbow
(2) and install the four nuts to hold the breathers
Put fumes disposal group (6) and the hose as-
sembly in position on the breather assemblies.
Tighten the clamps for the hose assembly and
install the bolts to hold clips (7) to the front drive