DISASSEMBLY AND ASSEMBLY
WATER TEMPERATURE REGULATORS
REMOVE WATER TEMPERATURE
a) remove fuel filter housing
Remove the clamps to remove the fuel lines
from the water temperature regulator housings
and remove the plate on top of the oil filter
Disconnect tube (I) from the regulator housings
and the aftercooler adapter. Remove the tube
from the engine.
Fasten a hoist to water temperature regulator
housings (2) as shown. Remove the bolts that
hold housings (2) to water manifolds (3) and
brackets (4). Remove the housings from the
engine. The weight of housings (2) is 49 kg (108
Remove the bolts and remove housing (5) from
the water temperature regulators.
Remove regulators (6) from the housing.
If necessary, remove seals (8) from the housing.
Remove ferrule (7) and the ball from the hous-