DISASSEMBLY AND ASSEMBLY
Make sure dowels (5) and (8) are installed in
cover assembly (6) so they extend 6 0.5 mm
(.236 .02 in.) above the surface of the cover
Use tooling (A) and install bearings (7) in cover
assembly (6) with the joints of the bearings in the
positions as shown.
Put cover assembly (6) in position and tighten
the bolts to hold it to the body assembly.
Make sure the two pins in cover assembly (9)
are installed so they extend 6 1 mm (.236
.039 in.) above the surface of the cover assem-
bly. Install the gasket and cover assembly (9) on
Put clean engine oil on valve spool (13). Install
valve spool (13), spring (12), gasket (11), cover
(10) and the bolts on the pump body.
Install the gasket and adapter assembly (14) on
the pump body.
a) install oil pump