DISASSEMBLY AND ASSEMBLY
remove air intake shutoff
Drain the coolant from the cooling system.
Remove the two bolts to remove elbow (1) and a
sleeve from the rear of the aftercooler housings.
Remove adapter (2) from the rear of aftercooler
Disconnect tube assembly (3) from adapter (5)
and the water temperature regulator housing.
Remove the tube assembly from the engine.
Remove all the bolts that hold elbow (4) in
position and disconnect elbow (4) from adapter
Remove the two bolts and remove adapter (5)
from the front of the aftercooler housings.