DISASSEMBLY AND ASSEMBLY
REMOVE AND INSTALL GOVERNOR
a) remove governor
Remove bolts (2) and pull governor drive (1)
from the front drive housing.
Make sure the O-ring seals are in position on the
front of governor drive (1) and put clean engine
oil on the seals.
Put governor drive (1) in position and install
bolts (2) to hold it to the front drive housing.
a) install governor401X
DISASSEMBLE GOVERNOR DRIVE
a) remove governor drive
Remove O-ring seals (1), (2) and (3) from the
front of the governor drive housing.
Remove the bolts that hold adapter (4) in
position and pull adapter (4) from the housing.
Remove pinion (5), shims (6), seals (7) and (8)
from adapter (4). Make a measurement of
the.4-0 thickness of shims (6) and put
identification on them for assembly purposes.