| Tweet |
Custom Search
|
|
|
||
 3500 ENGINES
DISASSEMBLY AND ASSEMBLY
GOVERNOR DRIVE
ASSEMBLE GOVERNOR DRIVE
1288-16
Tools Needed
A
B
1P510
Driver Group
1
8S2328
Dial Test Indicator Group
1
1.
Make an alignment of the oil hole in the bearing
with the drilled oil passage in governor drive
housing (1). Use tool group (A) and install the
bearing in housing (1) until it is 1.0 0.5 mm
(.039 .020 in.) below the inside surface of the
housing.
2.
Put coupling (3) in position in gear (2) and install
ring (4) to hold the gear and coupling as a unit.
3.
Install coupling (3) and gear (2) as a unit in
housing (1).
4.
Install pinion (5) in adapter (6).
330
|
||
|
||
