Quantcast OIL AND WATER PUMP DRIVE

Custom Search
 
  
 
3500 ENGINES
DISASSEMBLY AND ASSEMBLY
OIL AND WATER PUMP DRIVE
REMOVE OIL AND WATER
PUMP DRIVE
1313-11
start by:
a)  remove oil pump
b)  Remove water pump
1.
Remove bolts (1) and pull adapter assembly (2)
and the gears from the front drive housing as a
unit. The weight of the unit is 23 kg (50 lb.).
2.
Remove bolts(4) and pull adapter assembly(3)
from the front drive housing.
INSTALL OIL AND WATER
PUMP DRIVE
1313-12
1.
Make sure the O-ring seal is installed in the
groove of adapter assembly (1) and put clean
engine oil on it.
2.
Put adapter assembly (1) in position and install
the bolts to hold it to the front drive housing.
3.
Make sure the 0-ring seals are installed on the
grooves of adapter assembly (2) and have clean
engine oil on them.
4.
Put the gears and adapter assembly (2) in posi-
tion as a unit.  Make sure the drive gear is
engaged correctly with the idler gear and tighten
the bolts to hold adapter assembly (2) in
position.
end by:
a)  install oil pump.
b)  install water pump
350


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +