Quantcast INSTALL FUEL INJECTION CONTROL LINKAGE 1269-12

Custom Search
 
  
 
3500 ENGINES
DISASSEMBLY AND ASSEMBLY
FUEL INJECTION CONTROL LINKAGE
INSTALL FUEL INJECTION CONTROL
LINKAGE
1269-12
Tools Needed
A
B
1P510 Driver Group
1
9S9082 Engine Turning Pinion
1
1
Use tool group (A) to install the bearings in
bracket assemblies (1) until they are in the
center of their bores.  Check the bore in the
bearings after assembly.  The bearing bores
must be 21.925 0.015 mm (.8632 .0006 in.).
2.
Install two bracket assemblies (1) on each side
of the 3512 Engines.
Install one bracket
assembly (1) on the 3508 Engines.
3.
Install control shaft (2) on each side of the
engine block.
4.
Use tool group (A) and install the bearings in the
center of the bores in supports (3). Check the
bore in the bearings after assembly.
The
bearing bores must be 21.925  0.015 mm
(.8632 .0006 in.).
374


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.