Quantcast CAMSHAFTS - TM-5-2815-232-140413

Custom Search
 
  
 
3500 ENGINES
DISASSEMBLY AND ASSEMBLY
CAMSHAFTS
REMOVE CAMSHAFTS
1210-11
Tools Needed
A
B
C
9S9082  Engine Turning Tool
1
8B7548  Push-Puller Assembly
1
8B7559  Threaded Adapter
2
8B7561  Step Plate
1
8H684
Ratchet Wrench
1
6V4019  Camshaft Pilot Group
1
start by:
a) remove rocker shafts and push rods
b) remove crankcase breathers (left side only)
c) remove hydramechanical shutoff drive
(right side only)
d)  remove governor (right side only)
1.
Remove access covers (1) from the sides of the
engine.
2.
Remove bolt (3) and cap (4) that hold fuel rod
assembly (2) to the fuel control shaft.
3.
Remove bolts (5) to remove lever assembly (6)
and fuel rod assembly (2) as a unit from the
cylinder heads. If necessary, use tool (A) to turn
the flywheel until the camshaft is moved in a
position so that the fuel rod assembly can be
removed  between  the  engine  block  and
camshaft.
4.
Remove cover (7) from the left side of the
flywheel housing.
400


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.
6230 Stone Rd, Unit Q Port Richey, FL 34668

Phone For Parts Inquiries: (727) 493-0744
Google +