DISASSEMBLY AND ASSEMBLY
Remove the bolts and remove plate (8) from the
end of the camshaft on the left side of the engine.
Use tooling (B) to remove drive gear (9) from the
end of the camshaft on each side of the engine.
Remove the drive gears from the flywheel housing.
Remove the bolts and remove washer (10) from
the end of the camshaft on each side of the engine.
Push valve lifters ( 11) up away from the
camshaft into the cylinder heads and hold the lifters in
this position. An O-ring seal can be used to hold the
valve lifters up.