Starting From External Electrical
Always wear protective glasses when working with
Prevent sparks near the batteries. They could cause
vapors to explode. Do not allow cable ends to
contact each other or the engine.
Batteries give off flammable fumes that can explode.
Electrolyte is an acid and can cause personal injury
4. Move toggle switch to the ON position and push
if it contacts skin or eyes.
the air control valve in to crank the engine. As soon
as the engine starts, release the valve; or
Before attaching the booster cables, move toggle
switch at the engine to the OFF position.
When using booster cables, be sure to connect in
NEGATIVE (-) to NEGATIVE (-) and
POSITIVE (+) to POSITIVE (+).
Do not allow the free end of booster cables to touch
the engine. This helps avoid sparks.
This engine has a 24 or 32 Volt starting system. Use
only equal voltage for boost starting. The use of a
push in the oil pressure lockout knob and hold. Push
welder or higher voltage will damage the electrical
air control valve knob in to crank the engine. As soon
as the engine starts, release the air control valve knob
and the oil pressure lockout knob .