GEARCASE COVER INSTALLATION - CONTINUED
26. Vibration damper (3)
Six screws (9)
Using 1/2-inch drive 7/8-inch socket and
0 to 250 ft lb (0 to 350 Nm) torque wrench,
tighten to 115 to 125 ft lb (161 to 175 Nm).
Method used for mounting dial indicator is at discretion of using facility. Position dial
indicator on gearcase cover and set contact point of dial indicator on vibration damper
27. Gearcase cover (1)
Vibration damper (3)
Set dial indicator to zero.
Using crankshaft barring tool, rotate
engine and check dial indicator reading
for runout not to exceed 0.004 inch
TASK ENDS HERE
T A 2 4 2 3 9 4