TM   5-2815-241-34&P FLYWHEEL HOUSING INSTALLATION - CONTINUED ACTION LOCATION ITEM REMARKS 14. Crankshaft (1) 15. Flex plate (2) Flex  plate  (2) Six  screws  (3) 16. six  screws  (3) 17.  Six  screws  (3) Three  new locking  wires  (4) 18. Oil pan (5) Four  screws  (6) Using   1/2-inch   drive   3/4-inch   socket, and four new 6-inch  extension,  and  ratchet  handle, lockwashers   (7) screw  in  and  tighten. 19. Two  screws  (8), two  new  lockwashers (9),  and  two nuts  (10) Using  1/2-inch  drive  13/16-inch  socket, ratchet   handle,   and   3/4-inch   box-end wrench,  screw  in  and  tighten. Aline screw holes and put on. Using  1/2-inch  drive  7/8-inch  socket, 6-inch  extension,  and  ratchet  handle, screw  in  until  snug. Do  not  tighten. Using  1/2-inch  drive  7/8-inch  socket, 6-inch  extension,  and  0  to  250  ft  lb  (0  to  360 N•m)  torque  wrench,  tighten  alternately  to 190 to 200 ft lb (266 to 280 N•m). Thread  one  locking  wire  through  two  screws and,  using  6-inch  slip-joint  pliers,  twist ends to secure (see illustration). 2-102