TM 5-2815-241-34&P
VALVE AND INJECTOR ADJUSTMENTS - CONTINUED
A C T I O N
LOCATION
ITEM
REMARKS
TORQUE METHOD
Preadjustment Setup
NOTE
Injector plungers are adjusted before valves are adjusted.
Loosening all injector rocker arm adjusting screws and locknuts will indicate difference
between cylinders that have been adjusted and cylinders needing adjustment.
Steps given are typical for all three rocker arm housings.
17. Rocker arm
housing (1)
Injector rocker arm
Using 3/8-inch drive ST-669 adapter set,
(2), locknut (3),
and 1/4-inch drive 7/16-inch socket,
and adjusting
loosen locknut and unscrew adjusting screw
screw (4)
one turn.
T A 2 4 2 4 0 5
2-112
|
|
