VALVE AND INJECTOR ADJUSTMENTS - CONTINUED
18. Gearcase cover (5)
Rotate crankshaft until timing mark A or 1-6
pulley (6), timing
VS is alined with pointer.
mark (7) and
During repairs, injectors and valves are cold set with temperature of oil and component
parts within 10oF (-11 °C) of ambient air room temperature. Final hot-set adjustments
will be made on engine test stand. See Final Testing, Adjustments, and Troubleshoot-
ing on Engine Test Stand (page 2-414).
The following injector and valve adjusting procedures and Engine Specifications (page
2-434) require that injectors be adjusted before valves.
T A 2 4 2 4 0 6