Quantcast CRANKCASE  ACCESS  COVER  INSTALLATION

Custom Search
 
  
 
TM   5-2815-241-34&P CRANKCASE  ACCESS  COVER  INSTALLATION INITIAL   SETUP Tools Equipment   Condition Handle,   ratchet,   1/2-inch   drive Socket,   9/16-inch,   1/2-inch   drive Wrench,  torque,  0  to  150  ft  lb  (0  to 210  N•m),  1/2-inch  drive Engine removed from engine repair stand and mounted  on  engine  transport  stand.  (Engine transport  stand  and  mounting  instructions  will be  at  discretion  of  repair  facility.) Materials/Parts Gasket,  crankcase  access  cover Lockwasher  (four  required) ACTION LOCATION ITEM REMARKS Right side of engine  block  (1) New  crankcase  access a. Position  crankcase  access  cover  gasket cover  gasket  (2), and crankcase access cover on right crankcase  access  cover side of engine block. (3),  four  new  lock- b.     Using   1/2-inch   drive   9/16-inch   socket washers  (4),  and  four and  ratchet  handle,  screw  in  four  screws screws  (5) with  lockwashers  until  snug. c. Using   1/2-inch   drive   9/16-inch   socket and 0 to 150 ft lb (0 to 210 N•m) torque wrench,  torque  to  31  to  35  ft  lb  (42  to 49  N•m). TASK ENDS HERE T A    2 4 2 4 1 8 2-126


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.