EXHAUST MANIFOLD INSTALLATION - CONTINUED
Twelve screws (6
Using 1/2-inch drive 5/8-inch socket, 6-
inch extension, and 0 to 150 ft lb (0 to 210
Nm) torque wrench, torque to 25 ft lb
Safety goggles must be worn to prevent eye injury caused by flying steel chips.
Four new nut locking
plates (4) and four
new key washers (8)
Using 16-ounce ball-peen hammer and
1/2-inch cold chisel, bend up tabs of new
nut locking plates and new key washers.
TASK ENDS HERE