TM   5-2815-241-34&P CYLINDER  BLOCK  -  CONTINUED ACTION LOCATION ITEM REMARKS DISASSEMBLY NOTE Steps  1  and  2  are  typical  for  the  removal  of  all  six  cylinder  sleeves. 1. Cylinder block (1) Cylinder  sleeve  (2), preformed  packing (3),  packing  (4), and  gasket  (5) Using  ST-1201  sleeve  puller  bridge  (6)  and ST-1202  sleeve  puller  assembly  (7), remove. Discard   preformed   packing,   packing, and   gasket. 2.  Cylinder  sleeve  (2) Shim  or  spacer  (8) a. Remove  from  sleeve  and,  using  0-  to  1- inch  micrometer,  measure  thickness. Record  readings  so  same  shim  or spacer  thickness  can  be  installed. b. Tag shim or spacer, keep together with respective sleeve, and hold for inspection. TA   242426 2-141