TM 5-2815-241-37&P
LUBRICATING OIL PUMP - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
b.
c.
d.
16. Drive shaft (3)
Main drive gear (8)
Inspect for worn or broken teeth, pitting,
or cracks.
If broken teeth, wear, pitting, or
cracks exist, replace gear.
Using arbor press and ST-1158 bushing
mandrel, press out bushing.
Discard.
Using arbor press and ST-1158 bushing
mandrel, press in new bushing from
flush to 0.020 inch (0.51 mm) below
surface of gear, oil pump body, or
adapter housing.
Using boring machine, bore new bush-
ing to size of 0.8767 to 0.8777 inch
(22.268 to 22.293 mm).
2-269
|
|
