TM 5-2815-241-34&P
Section XII. ACCESSORY DRIVE MAINTENANCE
Page
Page
Accessory Drive . . . . . . . . . . . . . . . . . . . . . . . .. ..
2-276
Accessory Drive Pulley . . . . . . . . . . . . . . . .
2-280
ACCESSORY DRIVE
This task covers:
a. Disassembly (page 2-276)
c.
Inspection/Repair (page 2-277)
b. Cleaning (page 2-277)
d. Assembly (page 2-279)
INITIAL SETUP
Tools
Materials/Parts
Driver, bushing
Extension, 3-inch, 1/2-inch drive
Handle, ratchet, 1/2-inch drive
Micrometer, 1- to 2-inch
Micrometer, inside, 1- to 2-inch
Press, arbor
Puller, gear, coupling, ST-1249
Screwdriver, 1/4-inch, flat-tip
Socket, 1 5/16-inch, 1/2-inch drive
Bushing (if required)
Key (two required)
Equipment Condition
Accessory drive removed (page 2-43).
ACTION
LOCATION
ITEM
REMARKS
DISASSEMBLY
1. Accessory drive
shaft (1)
Self-locking nut (2)
2.
Coupling gear (3)
3.
Washer (4) and
thrust washer (5)
4. Housing (6)
Accessory drive
shaft (1)
5. Accessory drive
shaft (1)
Gear (7) and thrust
washer (8)
Using 1/2-inch drive 1 5/16-inch socket,
3-inch extension, and ratchet handle,
loosen and remove.
Using ST-1249 coupling gear puller, pull
from accessory drive shaft (1).
Take off.
Pull out.
Using arbor press, press off.
2-276
|
|
