TM   5-2815-241-34&P FUEL  PUMP  -  CONTINUED ACTION LOCATION ITEM REMARKS GEAR PUMP REPAIR N O T E For gear pump removal procedures, see steps 3 and 4 (page 2-292). 14. Gear pump Elbow   check assembly valve (5) a. Using  1/2-inch  open-end  wrench,  un- screw  and  remove. b. Check for one way flow operation. Discard  if  not  operational. 15. 16. Gear pump housing  (8) 17. Gear pump cover  (6) Gear  pump cover  (6)  and gaskets  (7) a. Using  16-ounce  ball-peen  hammer,  tap gear  pump  cover  from  gear  pump housing  (8). b. Take off gasket. Discard   gasket. Drive  gear  and shaft  (9)  and driven  gear  and shaft  (10) Lift drive gear and shaft and driven gear and shaft from gear pump housing. Bushing  sleeve  (11) a. Inspect for nicks, burrs, wear, or scoring. Discard  if  worn  or  scored. b. Using emery cloth, polish out nicks and burrs. TA  242535 2-295