TM 5-2815-241-34&P
FUEL INJECTOR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
102. Injector (1)
New gasket (2) and
a.
Place gasket in injector.
orifice plug (3)
b. Screw into injector.
c.
Using 3/8-inch drive, 0 to 150 in. lb
(0 to 17.5 N•m) torque wrench and
5/64-inch hex key, tighten orifice plug
to 8 to 10 in. lb (0.9 to 1.1 N•m).
103. ST-790 injector
injector inlet con-
Screw into ST-708 burnishing tool adapter
test stand (4)
nector (5) and
(7) by turning large knob section (8) until
burnishing tool (6)
secure.
T A 2 4 2 5 9 4
2-381
|
|
