TM   5-2815-241-34&P TURBOCHARGER  -  CONTINUED LOCATION 44. 45. ITEM Oil line inlet fitting   (14) Oil line outlet fitting   (15) ACTION REMARKS Screw in and tighten using 5/8-inch box- end   wrench. Screw  in  and  tighten  using  1  3/8-inch  box- end   wrench. FINAL   INSPECTION 46.  Turbocharger assembly Check  radial  clearance  of  diffuser  plate  and compressor  wheel  as  follows:  Push  shaft toward  side  of  bore,  and  using  thickness gage,  measure  minimum  distance  between wheel   vanes   and   housing. Clearance  should  be  0.006  to 0.028 inch (0.15 to 0.71 mm) for compressor  wheel  and  0.008  to 0.043 inch (0.20 to 1.09 mm) for turbine   wheel. T A    2 4 2 6 0 3 2-397