TM   5-2815-241-34&P WATER  INLET  HOUSING  REMOVAL INITIAL  SETUP Tools Extension,   6-inch,   1/2-inch   drive Handle,   ratchet,   1/2-inch   drive Socket,   9/16-inch,   1/2-inch   drive ACTION LOCATION ITEM REMARKS 3. REMOVAL 1.  Right  front  of cylinder block (1) Four  screws  (2)  and four   lockwashers   (3) Using   1/2-inch   drive   9/16-inch   socket, 6-inch  extension,  and  ratchet  handle, unscrew   and   remove. Discard    lockwashers. 2. Screw (4) and lockwasher   (5) Using   1/2-inch   drive   9/16-inch   socket, 6-inch  extension,  and  ratchet  handle, unscrew   and   remove. Discard    lockwasher. Water  inlet  housing Take  off. (6)  and  gasket  (7) Discard   gasket. 2-22 TA   242345