Quantcast Source  Code - TM-5-3895-362-24P_9

Custom Search
 
  
 
TM 5-3895-362-24P Code Application/Explanation PA Stocked items; use the applicable NSN to PB request/requisition items with these source PC** codes.   They are authorized to the category PD indicated by the code entered in the 3d PE position of the SMR code. PF **  Items  coded  PC  are  subject  to PG deterioration. Items with these codes are not to be KD requested/requisitioned individually.   They KF are part of a kit which is authorized to the KB maintenance category indicated in the 3d position of the SMR code.   The complete kit must be requisitioned and applied. MO-(Made at UMI Items with these codes are not to AVUM Level) be requested/requisitioned MF-(Made at DSI individually.   They must be made AVUM Level) from  bulk material which  is MH-(Made at GS identified by the part number in Level) the DESCRIPTION AND USABLE ML- (Made at ON CODE (UOC) column and ML-(Made at Spe- listed in the Bulk Material group cialized Repair   of the repair parts list in this Activity (SRA))    RPSTL.   If the item Is authorized MD-(Made at to you by the 3d position code of Depot) the SMR code, but the source code indicates it is made at a higher level, order the item from the higher level of maintenance. Items with these codes are not to be requested/requisitioned AO-(Assembled by   individually.   The parts that make UMI AVUM up the assembled item must be Level) requisitioned or fabricated and AF-(Assembled by assembled at the  level  of DS/AVIM maintenance indicted by the Level) source code.   If the 3d position AH-(Assembled by    code of the SMR code GS Category) authorizes you to replace the item, but the source code AL-(Assembled by indicates the item Is assembled SRA) at a higher level, order the item AD-(Assembled by    from  the  higher  level  of Depot) maintenance. XA - Do  not  requisition  an  "XA"-coded  item  Order  its next  higher  assembly  (Also  refer  to  the  NOTE following.) XB - If  an  "XB"  item  is  not  available  from  salvage, order it using the CAGE and part number given. XC- Installation  drawing,  diagram,  Instruction  sheet, field   service   drawing,   that   is   identified   by   the manufacturer’s part number. XD - Item is not stocked.   Order an "XD"-coded item through normal supply channels using the CAGE and part number given, if no NSN is available. NOTE:    Cannibalization  or  controlled  exchange,  when authorized, may be used as a source of supply for items with  the  above  source  codes,  except  for  those  source coded  "XA"  or  those  aircraft  support  items  restricted  by requirements of AR 700-42. (2) Maintenance     Code.               Maintenance codes  tell  you  the  level(s)  of  maintenance  authorized  to USE  and  REPAIR  support  items.      The  maintenance codes are entered in the third and fourth positions of the SMR code as follows: (a)   The   maintenance   code   entered   in the  third  position  tells  you  the  lowest  maintenance  level authorized  to  remove,  replace,  and  use  an  item.      The maintenance   code   entered   in   the   third   position   will indicate  authorization  to  one  of  the  following  levels  of maintenance. Code Application/Explanation C - Crew  or  operator  maintenance  done  within  unit maintenance or aviation unit maintenance. O Unit  maintenance  or  aviation  unit  category  can remove, replace, and use the item. F Direct support or aviation intermediate  level  can remove, replace, and use the item. H General support  level  can  remove,  replace,  and use the item. L Specialized  repair  activity  can  remove,  replace, and use the item. D Depot  level  can  remove,  replace,  and  use  the item. (b)   The   maintenance   code   entered   in the  fourth  position  tells  whether  or  not  the  item  Is  to  be repaired and identifies the lowest maintenance level with the   capability   to   do   complete   repair   (i.e.,   perform   all authorized  repair  functions).      (NOTE:     Some   limited repair   may   be   done   on   the   item   at   a   lower   level   of maintenance, if authorized by the Maintenance Allocation Chart (MAC) and SMR codes.) This position will contain one of the following maintenance codes: Code Application/Explanation 0 - Unit  maintenance  or  aviation  unit  is  the  lowest level that can do complete repair of the item. F Direct   support   or   aviation   intermediate   is   the lowest  level  than  can  do  complete  repair  of  the item. 2


 


Privacy Statement - Copyright Information. - Contact Us

Integrated Publishing, Inc.