4-18.
INSTALL TRANSMISSION TOP COMPONENTS
(SHEET 14 OF 16)
10 Arrange wiring harness (10) and connector wires (1, 4)
so that all wiring is tucked neatly under or between
solenoids (11).
FOLLOW-ON PROCEDURES: Install transmission top
cover assembly. Refer to this paragraph, TASK 8.
End of Task 7
TM 9-2520-272-34&P
TASK 8. INSTALL TRANSMISSION TOP COVER ASSEMBLY, BREATHER AND
LIFTING BRACKETS
COMMON TOOLS:
Extension, socket wrench, 1/2 inch square drive, 6 inch
Handle, socket wrench, 1/2 inch square drive
Socket, socket wrench, 1/2 inch square drive, 1/2 inch
Socket, socket wrench, 1/2 inch square drive, 9/16 inch
Socket, socket wrench, 1/2 inch square drive, 5/8 inch
Socket, socket wrench, 1/2 inch square drive, 3/4 inch
Wrench, torque, 0-175 ft-lb
REPAIR PARTS:
Gasket (transmission top cover) (73342) 23045129
SUPPLIES:
Bolt, 3/8-16 x 1-1/2 inch (4 required)
Cloth, batiste, lint-free (Item 6, Appendix C)
PRELIMINARY PROCEDURE:
• Control valve assemblies are installed. Refer to this paragraph, TASKS 3, 4, 5 and 6.
• Wiring harness assembly is installed. Refer to this paragraph, TASK 2 and 7.
Go to Sheet 15
Para. 4-18, Task 8
4-93
|
|
