TM   9-2520-272-34&P 4-27. ASSEMBLE   BEVEL   GEAR   ASSEMBLY (SHEET  1  OF  5) OVERVIEW The   bevel   gear   assembly   does   not   have   to   be   removed   from   the   transmission   to   install   exterior components.   However,   text   and   illustrations   are   based   upon   removal   of   the   bevel   gear   assembly from   the   transmission. Task Title Page 1 Install    Exterior    Components 4-167 TASK   1.   INSTALL   EXTERIOR   COMPONENTS COMMON   TOOLS: Adapter,   socket   wrench,   1/2   to   3/8   inch   square   drive Crowfoot,   socket   wrench,   3/8   inch   square   drive,   9/16   inch Extension,   socket   wrench,   1/2   inch   square   drive,   10   inch Extension,   socket   wrench,   3/8   inch   square   drive,   6   inch Hammer,   hand,   plastic   faced Handle,   socket   wrench,   1/2   inch   square   drive Pliers,   retaining   ring,   external Press,   arbor,   hand   operated Screwdriver,   flat   tip,   1/4   inch   wide   tip Socket,   socket   wrench,   1/2   inch   square   drive,   1/2   inch Socket,   socket   wrench,   1/2   inch   square   drive,   3/4   inch Socket,   socket   wrench,   1/2   inch   square   drive,   9/16   inch Universal   socket,   socket   wrench,   3/8   inch   square   drive,   9/16   inch Wrench,   combination,   9/16   inch Wrench,   torque,   0-175   ft-lb SUPPLIES: Petrolatum   (Item   14,   Appendix   C) Rag,   wiping   (Item   15,   Appendix   C) Wooden   blocks,   4   x   4   x   16   (4   required)   (Item   3,   Appendix   C) PERSONNEL   REQUIRED:   TW O • One   soldier   helps   to   lift   and   turn   bevel   gear   assembly. • One   soldier   disassembles   bevel   gear   assembly. Go  to  Sheet  2 Para.  4-27,  Task  1 4-167