TM 9-2520-272-34&P
4-28.
DISASSEMBLE CENTER HOUSING
(SHEET 16 OF 19)
28 Using hoist, S-hook and lifting tool, raise range input
shaft (28) and attached center carrier assembly (30)
until second clutch piston housing assembly (27) is high
enough to get hands under it.
29 Lower range input shaft (28) and center carrier
assembly (30) into transmission.
30 Remove hoist and S-hook from lifting tool.
NOTE
Second clutch piston housing assembly (27)
has to be pulled upward (one side, then the
other) using two hands, to get it free.
31 Remove second clutch piston housing assembly (27).
REPAIR: Refer to paragraph 4-29 for repair of
second clutch piston housing assembly (27).
32 Reattach S-hook and hoist to lifting tool and remove
range input shaft (28) and center carrier assembly (30).
33 Remove S-hook and lifting tool from shaft (28).
REPAIR: Refer to paragraph 4-29 for repair of
range input shaft (28).
Go to Sheet 17
Para. 4-28, Task 6
4-187
|
|
