TM 9-2520-272-34&P
4-29.
REPAIR CENTER HOUSING COMPONENTS
9
10
11
12
13
14
(SHEET 19 OF 31)
Using screwdriver, remove retaining ring (17) that
holds drum (5) onto carrier assembly (18).
Remove drum (5) from shaft (16).
NOTE
Do not remove retaining ring (19) unless
parts require replacement.
Using plastic faced hammer, drive shaft (16) into rear
carrier assembly (18) so that access to retaining ring
(19) is obtained.
NOTE
Opening of retaining ring (19) must be
rotated so that it is between gears of rear
carrier assembly (18).
15 Using screwdrivers and retaining ring pliers, remove
retaining ring (19) that holds shaft (16) to rear carrier
assembly (18). When retaining ring (19) is spread,
drive downward on shaft (16) with brass drift and ball
peen hammer.
Go to Sheet 20
Para. 4-29, Task 7
4-209
|
|
