TM 9-2520-272-34&P
4-30. ASSEMBLE CENTER HOUSING
SHEET 16 OF 21)
TASK 6. INSTALL OUTPUT PUMP DRIVE GEAR, LEFT OUTPUT SHAFT, LEFT STEER AND
OUTPUT SUN GEAR, AND LEFT STEER GEAR
COMMON TOOLS:
Hammer, hand, plastic faced
SUPPLIES:
Lubricating Oil (Item 10, Appendix C)
Petrolatum (Item 14, Appendix C)
Rag, wiping (Item 15, Appendix C)
NOTE
Transmission is on maintenance stand, left end up.
PRELIMINARY PROCEDURE: Output pump drive gear, left output shaft, left steer and
output sun gear, and left steer gear are removed. Refer to paragraph 4-28.
1 Coat output pump drive gear (1) with petrolatum.
Install output pump drive gear (1) onto left output
shaft (2).
2 Using plastic faced hammer, install left output shaft
(2), with gear (1) in place, into center housing.
3 Install left steer gear (3).
4 hstall left steer and output sun gear (4).
End of Task 6
Go to Sheet 17
Para. 4-30, Task 6
4-237
|
|
