REPAIR TRANSMISSION TOP COMPONENTS
SHEET 2 OF 7)
Do not remove solenoids (1) from valve
assemblies (2, 3) while valve assemblies (2,
3) are installed on the transmission. Bolts
can drop through oil return holes into the
transmission, damaging transmission. Bolt
must be retrieved, even if transmission has
to be disassembled.
Do not remove solenoids (1) unless
replacement is necessary
1 Using socket, remove two bolts (4) from any Of seven
solenoids (1) on main valve body assembly (2) and
lockup valve body assembly (3).
For solenoid A, one bolt (4) is 1/4 inch
longer than the other bolts (4). This is to
allow for the thickness of spring retainer (5).
2 For solenoid A, remove spring retainer (5).
3 Remove any of seven solenoids (1).
REPAIR: For replacement of solenoid insulators
and terminals, refer to this paragraph, TASK 2.
Go to Sheet 3
Para. 4-31, Task 1