4-6. INSTALL TRANSMISSION ON MAINTENANCE STAND
(SHEET 5 OF 7)
8 Using 9/16 inch socket, attach three-legged sling to
transmission where bolts were removed in Steps 5, 6
and 7. Install 3/8-16 x 1-3/4 inch bolt (16) through
each sling lug, with one washer (17) under each bolt
head and one washer (17) under each lug. Tighten
bolts until snug.
When raising three-legged Sling, also raise
two-legged Sling as necessary to maintain
minimum clearance of one foot (0.305 m)
between transmission and floor. Inadequate
clearance could cause transmission to be
damaged by hitting floor.
9 Raise two-legged sling attached to lifting brackets
until bottom of transmission is approximately one foot
(0.305 m) above floor.
Go to Sheet 6
Para. 4-6, Task 2