ARMY TM 9-2805-256-14
AIR FORCE TO 38G2-102-2
NAVY NAVFAC P-8-611-14E
6-7. Bearing Cap Assembly.
This task covers:
a. Removal
b. Repair
c. Installation
INITIAL SETUP
Tools
Equipment Condition
General Mechanic’s Tool Kit (Item 1, Appendix B)
Coil removed (para. 5-20).
Wrench, Torque (NSN 5120-00-230-6380)
Air cleaner removed (para. 4-21)
Rotating magnet removed (para. 5-19)
Materials/Parts
Low voltage cable removed (para. 5-13).
Rags, Wiping (Item 6. Appendix D)
Solvent, Drycleaning (Item 7, Appendix D)
Seal (P/N 13214E7063)
a. Removal. (figure 6-1)
(1)
(2)
(3)
6-4
NOTE
Steps 1 and 2 are for engines with breaker point ignition.
Loosen connector nut (1) and remove high tension cable (2) from bearing cap (3).
Tag and remove wiring from bearing cap (3).
Remove three nuts (4) and remove bearing cap (3), shims (5) and O-ring (6).
|
|
