ARMY TM 9-2805-257-14
AIR FORCE TO 38G2-103-2
NAVY NAVFAC P-8-612-14E
6-7. Bearing Cap Assembly (cont).
c.
Installation. (figure 6-2)
(1) Install bearing (14), O-ring (12), shims (11) and bearing cap (3) and secure with three nuts (10). Torque
nuts to 100-125 in. Ibs. (17860-22325 gr cm).
(2)
Check crankshaft end-play. Remove or install shims (11), as necessary, to obtain crankshaft end-play of
.000-.003 in. (.000-.007 cm).
Note
(3)
(4)
(5)
(6)
Steps 3 through 6 are for engines equipped with breaker point ignition.
Connect wiring, as tagged to noise suppression filters (9).
Install high tension cable (8) and tighten connector nut (7).
Install high tension cable access plate (6) and secure with two screws (4) and washers (5).
Install high tension cable (2) and tighten connector nut (1).
6-6
|
|
