ARMY TM 9-2805-257-14
AIR FORCE TO 38G2-103-2
NAVY NAVFAC P-8-612-14E
4-21. Air Cleaner Assembly.
This task covers:
a. Removal (dry)
c. Removal (oil bath)
b. Installation (dry)
d. Installation (oil bath)
General Mechanics Tool Kit (Item 1, Appendix B)
Flywheel cover removed for removal of dry air cleaner
Removal. Dry. (figure 4-11)
Loosen clamp (1) and remove air cleaner duct (2) from intake elbow (3).
Remove two screws (4) and washers (5) securing air cleaner assembly (6) and remove.
Inspect service indicator (7) and replace if cracked or otherwise damaged.
b. Installation. Dry. (figure 4-11)
(1) Position air cleaner assembly (6) on engine and secure with two screws (4) and washers (5).
(2) Install air cleaner duct (2) on intake elbow (3) and tighten clamp (1).