|
|
|
|
|
ARMY TM 9-2805-257-14
AIR FORCE TO 38G2-103-2
NAVY NAVFAC P-8-612-14E
4-31. Condenser (Breaker Point Ignition).
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
General Mechanic’s Tool Kit (Item 1, Appendix B)
NOTE
This engine is equipped with two condensers. The removal and installation procedures
are the same for both condensers.
a. Removal. (figure 4-23)
(1)
(2)
(3)
(4)
Unsnap two clips (1) securing breaker points cover (2) and move out of way.
Remove screw (3) and washer (4) and remove connector bar (5) from top of condenser (6).
Trace condenser lead (7) to suppression unit (8) and remove nut (9) and washer (10) and remove
condenser lead (7).
Remove screw (11 ) and washer (12) and remove condenser (6).
b.
Installation . (figure 4-23)
(1) Install condenser (6) and secure with screw (11) and washer (12).
(2) Install condenser lead (7) on suppression unit (8) and secure with nut (9) and washer (10).
(3) Install connector bar (5) and secure with screw (3) and washer (4).
(4) Install breaker points cover (2) and secure with two clips (1).
4-52
|
|
|
|
|
Privacy Statement -
Copyright Information. -
Contact Us
