ARMY TM 9-2805-258-14
AIR FORCE TO 38G2-89-21
NAVY NAVFAC P-8-614-14E
5-10. Oil Filler Tube and Gage.
This task covers:
R e p l a c e m e n t
INITIAL SETUP
Tools
Equipment Condition
General Mechanic’s Tool Kit (Item 1, Appendix B)
Top cover removed (para. 4-21).
R e p l a c e m e n t. (figure 5-4)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
5 - 10
Remove nut (1), Iockwasher (2), and screw (3) and move filler tube bracket (4) away from governor
housing (5).
Remove two nuts (6), Iockwashers (7) and screws (8) and remove retaining straps (9) and filler tube
bracket (4) from oil filler tube (10).
Remove gage (11) from oil filler tube (10).
Gently tap oil filler tube (10) with mallet from side to side and remove.
N O T E
Do not use a hammer to install oil filler tube.
Position oil filler tube (10) and tap gently with mallet from top to install.
Install retaining straps (9) and filler tube bracket (4) and secure with two screws (8), washers (7), and
nuts (6).
Aline filler tube bracket (4) with governor housing (5) and secure with screw (3), Iockwasher (2), and
nut (1).
|
|
