ARMY TM 9-2805-258-14
AIR FORCE TO 38G2-89-21
NAVY NAVFAC P-8-614-14E
(4) Connect leads to switch (3) as tagged.
(5) Install high tension cables (2) as tagged and tighten connector nuts(1).
c. T e s t .
(1) Check for 0 ohms between NC contact and case.
(2) Check for open circuit between NO contact and case.
(3) Replace a switch that does not meet the above requirements.
Figure 4-19. Low Oil Pressure Shutdown Switch and "T" Connector, Removal and Installation.
4 - 45