ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
4-45. Ignition Switch (cont).
b. Removal. (figure 4-44)
Step 1 is for engines equipped with breaker point ignitions.
(1) Tag and remove leads from ignition switch (l).
(2) Remove nut (2) and washer (3) and remove ignition switch (l).
Installation . (figure 4-44)
When installing the ignition switch, the OFF position on the switch corresponds to the
RUN position on the engine.
(1) Install ignition switch (1) and secure with nut (2) and washer (3).
Step 2 is for engines equipped with breaker point ignition.
(2) Connect leads to switch (1) as tagged.