ARMY  TM  9-2805-262-14 AIR  FORCE  TO  38G2-90-1 NAVY  NAVFAC  P-8-613-14E 5-19.  Oil  Pump  Gears  and  Wear  Plate. This  task  covers: a.  Removal b.  Inspection c. Installation INITIAL  SETUP Tools Equipment   Condition General Mechanic’s Tool Kit (Item 1, Appendix B) Oil  pump  cover  removed  (para.  5-18). Materials/Parts Rags, Wiping (Item  7, Appendix  D) Solvent,  Drycleaning  (Item  8,  Appendix  D) a. Removal. (figure 5-16) (1) Remove oil pump gears (1) from end cover (2). (2) Remove wear plate (3) from end cover (2). b. Inspection. (1) (2) WARNING Drycleaning  solvent  PD-680  used  to  clean  parts  is  potentially  dangerous  to  personnel  and property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of solvent is 100°F-138°F (38°C-600C). Clean all items in drycleaning solvent, and dry thoroughly. Inspect items for excessive wear, and replace worn or otherwise damaged items. Refer to table 5-2 for wear  limits. c. Installation.  (figure 5-16) (1) Install wear plate (3). (2) Install oil pump gears   (1). 5-36