|
ARMY TM9-2805-262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
6-11 . End Cover Oil Seal.
This task covers:
Replacement
INITIAL SETUP
Tools
Equipment Condition
General Mechanic’s Tool Kit (Item 1, Appendix B)
Rotating magnet removed (para.5-11).
Arbor Press
End cover removed (para.6-9).
Materials/Parts
Rags, Wiping (Item 7, Appendix D)
Solvent, Drycleaning (Item 8, Appendix D)
Seal, Oil (P/N13206E0138)
Replacement. (figure6-5)
(1) Using arbor press, remove oil seal (1) from end cover (2).
WARNING
Drycleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or
excessive heat. Flash point of solvent is 100°F-138°F (38°C-60°C).
(2) Clean oil seal mounting surfaces with drycleaning solvent, and dry thoroughly.
(3) Install oil seal (1) in end cover (2).
6-12
|
|
