ARMY TM 9-280S262-14
AIR FORCE TO 38G2-90-1
NAVY NAVFAC P-8-613-14E
Column (4). Maintenance Level. The maintenance levels, Unit, Direct Support, General Support, and
Depot, are allotted separate subcolumns within column 4. Entry of a work time figure (such as 1.0, 0.2) in a
subcolumn indicates that that level is authorized to perform the function listed in column 3, and the average time
required to do the function is the work time figure. If the number or complexity of tasks within a maintenance
function varies from one maintenance level to another, the applicable work time figure for each level will be
entered for that function. The work time figure represents the average time it takes to restore a
component/assembly to a serviceable condition under a typical field operating environment.
Column (5). Tool and Equipment specifies, by code, common tool sets (not individual tools
from those sets), common TM DE, and special tools, TM DE, and support equipment required to perform a
designated function. The code in Column 5 keys to the listing in Section Ill of the MAC.
f. Column (6) Remarks This column when applicable, contains a letter code with is keyed to an explanation
of the code contained in Section IV of the MAC.
B-5. Explanation of Columns in the MAC, Section Ill.
a. Column (1). Tool or Test Equipment Reference Code. The tool or test equipment reference code correlates
with a code used in the MAC, Section 11, Column 5.
b. Column (2). Maintenance Category. The lowest categoty of maintenance authorized to use the tool or test
Column(3). Nomenclature. Name or identification of the tool or test equipment.
Column (4). National/NATO Stock Number. The National stock number of the tool or test equipment.
Column (5). Tool Number. The manufacturers part number.
Explanation of Columns in the MAC, Section IV.
Column (1). Reference Code The code recorded in column 6, Section Il.
Column (2). Remarks. This column lists information pertinent to the maintenance function being performed
as indicated in the MAC, Section II.