ARMY TM 9-2805-262-14
AIR FORCE TO 38G2-9-1
NAVY NAVFAC P-8-613-14E
4-18. Governor Control Rod.
This task covers:
a. Adjustment
c. Repair
b. Removal
d. Installation
INITIAL SETUP
Tools
Materials/Parts
General Mechanic’s Tool Kit (Item 1, Appendix B)
Rags, Wiping (Item 7, Appendix D)
Solvent, Drycleaning (Item 8, Appendix D)
Lockwasher (P/N 13218E0518-38)
a. Adjustment. (figure 4-7)
(1)
(2)
(3)
(4)
(5)
Remove nut (1) and Iockwasher (2) securing governor control rod (3) to throttle lever (4).
Loosen lock nut (5).
Hold throttle lever (4) against stop.
Turn ball joint (6) clockwise or counterclockwise until shaft (7) on ball joint (6) alines with mounting hole
in throttle lever (4) and tighten lock nut (5).
Install shaft (7) in throttle lever (4) and secure with nut(1) and washer (2).
4-22
|
|
