TM    9-2815-202-34 4-5.   FUEL   STRAINER   REPLACEMENT This  task  covers: a.  Removal b.  Installation INITIAL   SETUP MODELS MANDATORY   REPLACEMENT   PARTS 7083-7395 7083-7398 4  Lockwashers  (App  F,  ltem  93) 1 Filter element Kit (App F, Item 16) 1 Flat washer TOOLS  AND  SPECIAL  TOOLS 1  Filter  element 1 Seal General  mechanics  tooI  kit  (App  B,  Item  96) a.   Removal (1) (2) (3) (4) (5) (6) (7) (8) Remove bolt (1) and flat washer (2) securing fuel strainer canister (3) to strainer head (4). Remove   canister   and   discard   flat   washer. Remove strainer element (5) from canister and remove seal (6) from strainer head. Discard element  and  seal. Remove bolt (7) and flat washer (8) from clip (9) and reinstall in water pump (10). Disconnect fuel supply line (11 ) at elbow connection (12) on fuel pump (13) and at tee fitting (14) on fuel strainer head (4). Remove fuel supply line (11). On model 7083-7398 only, disconnect air heater fuel supply line (15) at elbow on tee fitting (14). Remove two bolts (16), two Iockwashers (17), and two nuts (18) securing fuel strainer head (4) to mounting bracket (19). Remove fuel strainer head and discard Iockwashers. Remove two bolts (20), two Iockwashers (21), bolt (22), flat washer (23), and spacer (24) securing  mounting  bracket  (19)  to  front  of  engine.  Discard  Iockwashers. Remove  mounting  bracket  (19). b.    Installation (1)  Install  bolt  (22),  flat  washer  (23),  spacer  (24),  two  bolts  (20),  and  two  Iockwashers  (21) securing mounting bracket (19) to front of engine. (2) Install two bolts (16), two Iockwashers (17), and two nuts(18) securing fuel strainer head (4) to mounting bracket (19). 4-10